| |
Use this page to order online with our secure payment processing. Prices are in GBP. All orders are usually shipped within 72 hours after the order is placed. If you have any questions about our products or application, please contact us by email at contact@nansulate.co.uk for assistance or call us at PH: 01524 782287 Mobile: 07831 360663 OR 07860 449055. Customer service is our #1 priority!
Please Note: Some customers may notice a price differential between the US retail price and the UK retail price. As with all imported goods, the UK cost has to incorporate the price of duties, VAT, and shipping. However you will find that overall your order costs you less coming from the UK due to the drastically reduced delivery charge and absence of the import duty. The all/in cost (including VAT and duties) for a typical 1-gallon order purchased from our US site is approx: £142.34 GBP. That same order purchased from the UK (including VAT) is approx: £96.35 GBP. So you do infact save by purchasing from within the United Kingdom.
Prices below do not include VAT. Below prices and delivery costs are applicable to UK deliveries only Note: Products are sold by weight, not volume.
Use our Square Foot Calculator.
|
|
 |
Nansulate® HomeProtect Clear Coat
Residential Insulation Coating.
Exterior & Interior Use - Walls, Ceilings, Attics, Water Heaters. Mold & Moisture Resistant. Clear, smooth, matte finish.
£78.00 - 1 gallon
Covers 14 m2. with 3-coats
plus VAT
|
Nansulate® Energy Protect™
Commercial Building Insulation Coating.
Exterior & Interior Use - Factory Windows, Walls, Ceilings, Ducts. Mold & Moisture Resistant. Clear, smooth, matte finish.
£83.00 - 1 gallon
Covers 14 m2. with 3-coats
plus VAT
|
Nansulate® Crystal
Residential & Commercial Roof Coating. Clear protective roof insulation coating for sloped tile and shingle roofs. Mold & Moisture Resistant. Clear, smooth, matte finish.
£86.00 - 1 gallon
Covers 14 m2. with 3-coats
plus VAT
|
|
|
 |
 |
Nansulate® Translucent High Heat
Insulation & Corrosion Prevention Coating for Steam Pipes, Heat Exchangers, Valves, Boilers - Up to 400F/204C, Clear or Opaque, smooth, finish, depending upon surface temperature.
£96.00 - 1 gallon
Covers 4.2 m2 with 10-coats
plus VAT
|
Nansulate® Translucent PT
Insulation & Corrosion Prevention Coating for Pipes - Tanks - Ovens - Metal Surfaces - Up to 256F/125C, Direct-to-Metal Coating. Clear, smooth, matte finish.
£83.00 - 1 gallon
Covers 7 m2 with 6-coats
plus VAT
|
Nansulate® Translucent GP-NSF
NSF registered for food manufacturing equipment and food sensitive areas, for use on pipes, vessels, ovens, cookers, tanks - up to 256F/125C. Mold & Moisture Resistant. Clear, smooth, matte finish.
£90.00 - 1 gallon
Covers 7 m2 with 6-coats
plus VAT
|
|
 |
 |
|
Nansulate® LDX
Safe Lead Encapsulation Coating - use over lead contanimated surfaces - Brick, Lead-Based Paint, Concrete, Metal. Encapsulates for Lead Remediation of surfaces. Clear, smooth, matte finish.
£86.00 - 1 gallon
Covers 14 m2. with 3-coats
plus VAT
|
NanoBoost™
Thermal Insulation and Corrosion Prevention Coating for Automotive Part - for Fuel Efficiency and Cooler Automobile Interior - Use on Intake Manifold, Engine Compartment, Interior Roof - surfaces up to 400F/204C. Clear, smooth, matte finish.
£42.00 - 1 quart
Covers 1.75 m2 with 6-coats
plus VAT
|
|
|
| |
Get a Free Tshirt - Just tell us your Nansulate® story! |
|
Nansulate® is Patented technology protected by U.S. and international Patents.
Weltex is an authorized Distributor for Nansulate® Coatings.

© Copyright 2012 Industrial Nanotech, Inc. All Rights Reserved. Nansulate® is a registered trademark of Industrial Nanotech, Inc.
Menu by Apycom jQuery Menus
|
|